ADA MP-2 RACKMOUNT MIDI TUBE GUITAR PRE-AMP

The MP-2 is the latest generation of ADA's programmable tube preamp technology, and contains more gain, processing options, MIDI functions, and professional features than any previous product.

The MP-2 is all analog under digital/MIDI control 10 preamp voicings - choice of tube or SS Analog Chorus Analog Wah Analog Tremolo Analog Compressor Analog 9 band EQ Analog Noise Gate FX Loop Full MIDI 2 knob room EQ.


Features:
* Complete digital control of an all-analog signal path.

* 128 User programs plus 39 factory Preset programs.

* Two low-noise 12AX7A tubes with 10 tube voicing settings and overdrive.

* Onboard compressor for maximum sustain and funk squeeze.

* Four-band tone controls for basic tone shaping.

* Nine-band graphic equalizer for detailed tone adjustments.

* Powerful effects, including wah-wah, tremolo, and stereo chorus.

* Noise reduction circuitry to reduce unwanted hum and noise at high gain settings.

* Stereo effects loop with programmable mix control. Side-chain design keeps dry signal within MP-2, preserving dynamics and signal-to-noise ratio.

* Speaker emulation circuit and room compensation equalization.

* Cabinet-emulated, balanced XLR outputs with ground lift, as well as unbalanced 1/4" phone outputs for recording.

* Independent unbalanced 1/4" phone outputs for stage use.

* Front and rear panel 1/4" phone inputs for easy access.

* Complete MIDI implementation, including Real-Time MIDI for changing parameters "on the fly."

* Optional MIDI Controller Pedal Pack provides instant access to any program for fast on-stage control, plus real-time MIDI continuous control.



Technical data:
Tube Complement: Four stages of gain using two, low noise 12AX7A/7025 tubes.

Inputs:
Front panel: One 1/4" phone jack, high impedance (390k Ohms) 3.6 VRMS (+12.2 dBV).

Rear panel: One 1/4" phone jack, same impedance as front panel input.

Tube Voicings: 10 different tube voices.

EQ: Passive, 4-band tone controls, bass, mid, treble, and presence. "Q" and center frequencies shift according to voicings.

Graphic EQ: 9-band 3/4 octave +/- 12 dB cut/boost. Chorus: Depth 0 (none) to 100.

LFO Rate 0.1 sec to 10 sec.

Effect Loops: Stereo, independently

programmable, each with separate switches for line or instrument level effects processors.

Stereo Outputs: 1/4"phone jack for each channel. Low impedance output (500 Ohms). Maximum output into 600 Ohms = 3.6 vRMS (+11.1 dBv), Maximum output into 50k Ohms = 7.2 vRMS (+17.1 dBv).

Unbalanced Recording Outputs: 1/4" phone jack for each channel. Bandwidth limited low impedance output (500 Ohms). Maximum output into 600 Ohms = 3.6 vRMS (+11.1 dBv), Maximum output into 50k Ohms = 7.2 vRMS (+17.1 dBv).

Balanced Recording Outputs: Male XLR jack for each channel. Bandwidth limited 50Hz-3kHz (approx.), selectable output level, Line out low impedance = 600 Ohms, Maximum level = 4 VRMS (+12 dBv), Mic out low impedance (200 Ohms). Maximum level = .15 VRMS (-16 dBv).

Overall S/N ratio: 20Hz 20kHz at stage
outputs, clean settings -86 dB A weighted.

Power: 120VAC, 50/60Hz. Power
consumption: 35 watts.

Dimensions: D = 10.5", W= 19", H = 1.75" (1 rack space).

Weight: 7 lbs., 9 lbs. shipping.